Webasto Thermo 230 Instructions d'exploitation Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
Programmed Heater Operation
Three memory locations numbered 1 to 3 are available. Each memory
location can be assigned a given time together with the day of the
week.
Pre-selected Starting Times
The pre-selected starting time is the time at which the heater switches
itself on automatically.
We recommend that memory locations 1 and 2 be used for presetting
starting times within 24 hours of setting the timer.
Memory location 3 can be used for a starting time within the next 7
days of setting the timer.
Operating Time
The period of time during which the heater is in operation is referred to
as operating time. The heater remains in operation for as long as the
operating time has been preset.
Heater operation can be pre-selected for any time from as little as 1
minute to a maximum of 120 minutes (factory preset is 60 minutes).
Remaining Operating Time
The remaining operating time refers to the period of time the heater
still continues to remain in operation. It can only be changed while
heater is in operation.
Setting the Digital Timer
After the power has been connected, all symbols on the digital display
are flashing. The time of the day and the day of the week must be set.
All flashing displays and symbols of the timer can be set by means of
the and buttons.
If the buttons are not pressed within 5 seconds, the currently displayed
time or function will be stored.
When the and buttons are pressed for more than 2 seconds, the
quick digit advance mode is activated.
Fig. 201: 7-Day Digital Timer – Model 1531
NOTE
If the ignition is switched
off while the heater is in
operation, the remaining
operating time of 5
minutes flashes on the
display and the heater
continues to operate for
this period of time.
Thermo 230/300
2 Operating your Webasto Heater
203
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Commentaires sur ces manuels

Pas de commentaire