Webasto Thermo Top C - PME Instructions d'exploitation télécharger pdf (Page 7)

Thermo Top C / Thermo Top E Holder

5 Holder

The holder must be secured to the car body or an intermediate holder

with at least four M6 screws.

Washers with a minimum diameter of 22 mm must be used if the body

surfaces are plane.

The holder must not be secured to the car body with self-tapping screws.

The holder must be correctly machined in compliance with the minimum

bending radii and in accordance with the technical rules.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Pas de commentaire

Webasto Thermo Top C - PME Instructions d'exploitation Page 7