21
Mercedes-Benz E-Class BR 211 / CLS BR 219
Fuel Connection
CAUTION!
Open the vehicle's tank-cap lock, ventilate the tank and then re-close the tank lock.
Catch any fuel running off with an appropriate container.
Install the fuel line so that they are protected from impact by rocks!
Unless specified otherwise, always fasten using cable clips.
Fit the fuel line and cable harness with edge protectors around sharp edges.
WARNING!
The cable harness to the metering pump should be installed based on the cable harness installation
diagram.
Punch a Ø 5mm hole in the protective rubber
sleeve
protective rubber sleeve. Introduce
the fuel line
3 to the cross rail Slide a rubber
buffer
2 [2x] on the fuel line.
Install the
fuel line in
the frame
side rail.
Punch a Ø 5mm hole in the protective rubber
sleeve
2. Pull the fuel line 1 from the frame
side rail.
Run the
fuel line
out of the
frame side
rail.
1
Double line clips [4x]
2 Fuel line
Replace
clips,
fasten
down fuel
line
46
3 21 2
47
2
1
48
1
2
Commentaires sur ces manuels